433MHz Universal 4-Button Remote Duplicator – Garage & Gate

Clone Any 433MHz Fixed Code Remote in Seconds

Take full control of your garage door, gate, barrier, or alarm system with this Universal 433MHz 4-Button Remote Control Duplicator. Designed for effortless cloning of fixed-code and learning-code wireless remotes, this compact key fob lets you duplicate your existing remote without any programming tools or technical expertise. Made in China.

Key Features

• Universal 433MHz Compatibility – Works with a wide range of fixed-code and learning-code remote controllers operating at 433MHz
• 4-Channel Control – Independently clone and operate up to 4 separate devices from one fob
• Wide Chip Support – Compatible with chips including 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527, 1527, 2240, HCS101, HCS200/HCS201, HCS300/HCS301, and more
• Long Wireless Range – Transmits up to 150m in open environments
• Easy One-Step Cloning – LED indicator confirms successful copy with 3 quick flashes
• Compact & Portable – Slim 55×30×15mm body fits easily on any key ring
• Broad Application – Ideal for garage doors, electric gates, barrier arms, telescopic doors, and alarm systems

Specifications

How to Use

Clear Code

Press and hold the two upper buttons simultaneously until the LED flashes 3 times — the memory is cleared and ready for a new clone.

Copy / Clone

1. Hold your original remote close to the duplicator.
2. Press the corresponding button on both remotes simultaneously.
3. When the LED flashes rapidly 3 times, the copy is complete.
4. Repeat for each additional button/channel as needed.

Note: Encrypted HCS200 and HCS300 remotes cannot be copied due to encryption. Please verify your remote's chip type before purchasing.

What's in the Box

• 1× Universal 433MHz Remote Control Duplicator (per unit ordered)

Related Products You May Like

• 0–50 PSI Dial Tire Pressure Gauge – Car, Motorcycle & Bike
• 1.5M Nylon Braided 3.5mm AUX Audio Cable | Car, Phone & Speaker
• 1.5L Electric Foam Sprayer – Portable High-Pressure Car Wash Gun

For general consumer electronics safety information, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: Will this 433MHz remote duplicator work with my garage door opener?

A: This duplicator is compatible with most 433MHz fixed-code and learning-code garage door openers and gate controllers. It supports a broad range of chips (2260, 2262, HT-series, 1527, and more). Check that your existing remote uses a fixed or learning code at 433MHz — encrypted rolling-code remotes (e.g. encrypted HCS300) are not supported.

Q: How many remotes can I clone onto one duplicator?

A: The duplicator features 4 independent channels (buttons), so you can clone up to 4 separate remotes or 4 different functions (e.g. open gate, close gate, garage door, alarm) onto a single fob.

Q: What is the wireless transmission range of this duplicator?

A: In an open environment, the duplicator can transmit up to 150 metres. Range may vary slightly in environments with walls, interference, or other obstructions.

Q: Do I need any special tools or software to clone my remote?

A: No tools or software are required. Simply hold your original remote next to the duplicator and press the target button on both simultaneously. The LED will flash 3 times to confirm a successful copy — no technical knowledge needed.