Solar LED Floodlight – Motion Sensor, Remote & IP65 Waterproof
Smart Solar Floodlight with Motion Sensor & Remote Control
Illuminate your outdoor spaces with total confidence using this powerful solar-powered LED wall floodlight. Built for gardens, garages, driveways, courtyards, and more — it charges itself by day and keeps your property bright and secure by night. With 360° PIR motion sensing, a convenient remote control, and a robust IP65 waterproof rating, this modern smart light is as practical as it is stylish.
Made in Mainland China.
Why You'll Love It
- No Wiring Needed – Runs entirely on solar power with a built-in monocrystalline silicon panel (5.5V, 1.43W). Just mount and go.
- 360° Motion Detection – PIR sensor detects movement up to 5–10 metres away across all four sides for comprehensive coverage.
- Remote Control Convenience – Switch modes and adjust settings without leaving the comfort of your home.
- 3 Intelligent Lighting Modes – Choose from full motion-activated bursts, dim-always-on with motion boost, or continuous low glow.
- Dimmable LED Technology – Available in 42, 84, 126, or 168 LED configurations to match your brightness needs.
- Long-Life Lithium Battery – 18650 lithium battery (3.7V, up to 10,000mAh) with built-in charge/discharge protection; fully charges in just 6 hours of sunlight.
- IP65 Waterproof & Weather-Resistant – PC + ABS construction stands up to rain, wind, and temperature changes year-round.
- Energy-Saving & Eco-Friendly – 100% solar-powered with zero electricity costs; CCC, CE, and RoHS certified.
- Easy Assembly – Mounts to any sun-exposed outdoor wall with just 2 screws. Indicator light confirms operating status at a glance.
Lighting Modes at a Glance
| Mode | Behaviour | Indicator |
|---|---|---|
| OFF | Light off | Red |
| Mode 1 | Bright on motion (15–30 sec), then off | Active |
| Mode 2 | Dim always-on; bright burst on motion (15–30 sec) | Active |
| Mode 3 | Continuous dim glow, regardless of motion | Active |
Specifications
- Body Material: PC + ABS
- LED Options: 42 / 84 / 126 / 168 LEDs
- Solar Panel: Monocrystalline silicon, 5.5V, 1.43W
- Battery: 18650 Lithium, 3.7V — 3,000 / 5,000 / 8,000 / 10,000mAh (with protection circuit)
- Output Power: 5V / 7W
- Charging Time: ~6 hours (full sun)
- PIR Sensing Angle: 360°
- Sensing Distance: 5–10 metres
- Protection Level: IP65
- Certifications: CCC, CE, RoHS
- Power Source: Solar
- Style: Modern
- Installation: 2-screw wall mount (hardware included)
- Origin: Made in Mainland China
Perfect For
Garden paths, garage walls, courtyard entrances, roof terraces, driveway gates, shop fronts, villa perimeters, and any outdoor area that needs reliable, wire-free illumination.
You May Also Like
- 10-Mode Garden Hose Nozzle – High-Pressure Spray Gun
- 1.1M Eagle Hawk Kite Bird Scarer – Garden Bird Repellent
- 1.2L Long Spout Watering Can – Indoor & Outdoor Plants
For more information on outdoor lighting energy efficiency, visit the U.S. Department of Energy – Outdoor Lighting Guide.
Frequently Asked Questions
Q: How long does the solar floodlight stay on after charging?
A: After approximately 6 hours of direct sunlight charging, the light can operate for several hours depending on the selected mode and battery capacity (up to 10,000mAh). In dim/low-glow mode, runtime is significantly extended compared to full-brightness motion bursts.
Q: Is this solar LED floodlight truly waterproof?
A: Yes. The light carries an IP65 waterproof rating, meaning it is fully protected against dust ingress and low-pressure water jets from any direction — making it suitable for year-round outdoor use in most weather conditions.
Q: Can I use the remote control to change modes?
A: Absolutely. The included remote control allows you to switch between lighting modes and adjust settings conveniently from a distance, without needing to reach the mounted unit directly.
Q: What is the sensing range of the motion sensor?
A: The built-in PIR (passive infrared) motion sensor detects movement within a 360° field at distances of 5 to 10 metres, providing comprehensive coverage around the installation area.
Q: How do I install the outdoor solar floodlight?
A: Installation is simple — just select a sun-exposed outdoor wall and secure the light using 2 screws (included). No electrician or wiring is required, making it a true DIY-friendly setup.