WOYO PDR100 Slide Hammer Dent Puller – Paintless Dent Repair Kit

Restore your vehicle's bodywork to factory condition without expensive body shop visits. The WOYO PDR100 Slide Hammer Dent Puller Kit is a professional-grade paintless dent repair (PDR) solution designed for automotive and motorcycle body panels. Whether you're tackling hail damage, door dings, or dents on fenders and side panels, this all-in-one kit gives you the tools to get the job done quickly and affordably — no paint damage, no fuss.

Why Choose the WOYO PDR100?

Cold Glue Technology: No heating required — the included cold glue works at normal ambient temperatures below 84°F (29°C), saving you time and hassle.
Reusable Components: Both the steel tabs and cold glue are designed for repeated use, making this kit a cost-effective long-term investment.
Three Tab Sizes Included: Tackle a wide variety of dent shapes and sizes with the three different steel tabs provided in the package.
Ergonomic Handle: The friction-enhanced grip handle makes operation comfortable and controlled for more precise pulling.
Versatile Application: Ideal for sheet metal processing, auto body dent removal, hail damage, fenders, door panels, and side panels on cars and motorcycles.
Easy to Operate: Simple step-by-step process — clean, attach, pull, and release. No prior professional experience required.

Cold Glue Usage Tips

Best used at ambient temperatures below 84°F / 29°C.
Do not apply direct heat to the glue — overheating reduces adhesion.
Overcooling can also weaken the bond; find the optimal temperature for your environment through a few test pulls.
Ensure the dent area and your hands are clean before applying.

Supported Dent Types

The PDR100 is ideal for soft, smooth dents without access to the edge. For dents that have access to the edge, you may need an additional assist tool. For remaining smaller or irregular dents after initial pulling, pair with auxiliary PDR tools such as PDR007, PDR009, rods, hooks, or a rubber hammer for a perfect finish.

How to Use the WOYO PDR100

Clean the dented area thoroughly.
Select the appropriate tab size and install it onto the slide hammer.
Clean your hands and apply the cold glue onto the tab.
If the car body is cold, gently warm the dented area before using the slide hammer.
Begin pulling — repeat several times until the dent is fully corrected.
Use supplementary PDR tools if any smaller dents or irregular shapes remain.
Once finished, remove the cold glue from the tabs, clean thoroughly, and store for next use.

Package Contents

Slide Hammer × 1
Steel Tabs × 3 (three sizes)
Cold Glue × 1

Made in Mainland China.

Related Products You May Like

For more information on safe automotive tool use, visit the OSHA Hand & Power Tools Safety Guidelines.

Frequently Asked Questions

Q: Is the WOYO PDR100 suitable for deep or sharp-edged dents?

A: The WOYO PDR100 Slide Hammer Dent Puller is best suited for soft, smooth dents without access to the edge. Deep or sharp creases and dents with accessible edges may require additional PDR tools such as rods, hooks, or a rubber hammer for complete repair.

Q: Does the cold glue need to be heated before use?

A: No — that's one of the key advantages of the PDR100 kit. The cold glue works at normal room temperatures below 84°F (29°C) and does not require pre-heating, saving time during the repair process. Avoid direct heat on the glue, as this can reduce its bonding strength.

Q: Can the steel tabs and cold glue be reused multiple times?

A: Yes! Both the steel tabs and cold glue included in the WOYO PDR100 kit are fully reusable. Simply remove the glue from the tabs after use, clean them, and return the glue to its original packaging for future repairs.

Q: What types of vehicles and panels is the PDR100 compatible with?

A: The WOYO PDR100 Paintless Dent Repair kit is designed for use on automotive and motorcycle sheet metal body panels, including hoods, doors, fenders, and side panels. It is compatible with most standard metal car and motorcycle body surfaces.