Quieter Cabin, Cooler Ride — 10-Pack Sound & Heat Insulation Mats

Upgrade your driving experience with these aluminum foam sound deadening and heat insulation pads. Designed for car doors, engine hoods, drain pipes, and other interior panels, this 10-piece kit significantly reduces road, wind, and engine noise while helping maintain a comfortable cabin temperature year-round. Made in Mainland China.

Why You'll Love These Insulation Pads

Dual-Action Performance: Each pad works simultaneously as a sound dampener and a thermal barrier — keeping exterior noise out and regulating interior temperatures.
Versatile Placement: Ideal for car doors, engine hoods, drain pipes, wheel arches, and trunk floors.
Premium Aluminum Foam Construction: The silver-tone aluminum foam material is lightweight yet durable, providing excellent acoustic and thermal insulation.
Strong Self-Adhesive Backing: Simply peel and press for a secure, long-lasting bond to most clean metal surfaces.
Generous Size: Each pad measures 250×180mm (approx. 9.8" × 7.1") with a 5mm / 0.20" thickness — substantial enough to make a real difference.
10 Pads Per Pack: Enough to cover multiple door panels or a combination of vehicle areas in a single installation session.

Product Specifications

Material: Aluminum Foam
Color: Silver Tone
Size: 250 × 180mm (approx. 9.8" × 7.1")
Thickness: 5mm / 0.20"
Placement: Car door, engine hood, drain pipe, and more
Pack Includes: 10 × Sound & Heat Insulation Mats

Installation Guide

Prepare the Surface: Thoroughly clean and dry the surface where the pad will be applied. Remove any grease, dust, or debris for the best adhesion.
Remove Door Panels (if applicable): For door installations, carefully remove the door panel. Keep all screws in a safe place so they're easy to find when reassembling.
Peel, Press & Roll: Peel the backing, position the pad, and use a roller tool to press firmly — ensuring a tight, bubble-free bond with the sheet metal for maximum damping performance.
Choose Your Configuration: Use the sound-deadening pad alone, the heat insulation layer alone, or combine both for the most complete acoustic and thermal upgrade.
Reassemble: Refit door panels or covers carefully, avoiding any covered screw holes or air vents.

Important Safety Notes

Do not cover chassis wiring, drainage holes, or air vents during installation.
Do not apply directly to heat sources such as exhaust pipes, mufflers, or hot pipes.
For best results, apply at room temperature and allow adhesive to cure before driving.

Related Products You May Like

For more information on automotive safety and vehicle maintenance best practices, visit the U.S. Consumer Product Safety Commission (CPSC).

Frequently Asked Questions

Q: Where can these sound deadening insulation pads be installed in my car?

A: These versatile aluminum foam pads are designed for multiple locations including car doors, engine hoods, drain pipes, wheel arches, trunk floors, and firewall panels. Anywhere you want to reduce cabin noise or improve thermal comfort is a suitable location.

Q: Do I need special tools to install the car sound insulation pads?

A: No special tools are required. A roller tool is recommended to firmly press the self-adhesive pads onto metal surfaces for the best bond and damping performance. Standard trim removal tools are helpful if you need to remove door panels first.

Q: Will 10 pads be enough to cover all four car doors?

A: Each pad measures 250×180mm, so depending on your vehicle's door size and how much coverage you want, the 10-pack can cover significant portions of 2–4 doors. Many users supplement with additional packs for full door coverage. You can also cut the pads to fit specific areas.

Q: Can I apply these pads to surfaces that get very hot, like near the engine?

A: Do not apply these pads directly onto extreme heat sources such as exhaust pipes or mufflers. They are suitable for the engine hood inner surface and firewall areas where direct contact with a live heat source is avoided. Always ensure the application surface is clean and within safe temperature limits before installation.