3D Nano Carbon Fiber Car Protective Strip | Anti-Scratch Film

Keep your vehicle looking showroom-fresh with this 3D Nano Carbon Fiber Protective Strip. Designed for door edges, door sills, side mirrors, trunks, and more, this flexible self-adhesive film creates an invisible yet tough barrier that guards your car's paint against everyday knocks, scuffs, and the elements.

Made in Mainland China.

Why You'll Love It

• Anti-Scratch & Wear-Resistant: The 3D nano carbon fiber surface stands up to daily contact, keeping paint underneath intact and looking new.
• Anti-Collision Cushion: Soft yet resilient material absorbs light impacts on door edges and sills so your finish stays pristine.
• 100% Waterproof: Weather-sealed adhesive backing won't lift or bubble in rain, humidity, or car washes.
• Easy DIY Installation: Simply measure, cut to length, peel, and press — no special tools required. Works on virtually any smooth vehicle surface.
• Multiple Sizes Available: Choose lengths of 1m, 3m, 5m, or 10m and widths of 3cm, 5cm, 7cm, or 10cm to suit your exact coverage needs.
• Realistic Carbon Fiber Texture: Adds a sleek, sporty aesthetic wherever applied.

Specifications

• Material: 3D Nano Carbon Fiber
• Available Lengths: 1m / 3m / 5m / 10m
• Available Widths: 3cm / 5cm / 7cm / 10cm
• Functions: Anti-collision, anti-scratch, wear-resistant, waterproof
• Installation Positions: Door edges, door sills, side mirrors, trunk edges, bumpers, and more

Installation Tips

1. Clean the surface thoroughly and allow it to dry completely.
2. Measure the area and cut the strip to the desired length.
3. Peel the backing and align the strip carefully before pressing firmly into place.
4. Run your fingers along the edge to remove any air bubbles.

Please Note

• Minor size deviations may occur due to manual measurement methods.
• Actual color may vary slightly from product images depending on display settings and lighting conditions.

Related Products You May Like

• 1.5L Electric Foam Sprayer – Portable High-Pressure Car Wash Gun
• 0–50 PSI Dial Tire Pressure Gauge – Car, Motorcycle & Bike

For more tips on protecting your vehicle's exterior, visit the U.S. Consumer Product Safety Commission (CPSC) for guidance on safe use of adhesive automotive products.

Frequently Asked Questions

Q: What surfaces can the 3D nano carbon fiber protective strip be applied to?

A: This protective strip is designed for smooth automotive surfaces including door edges, door sills, side mirrors, trunk lids, and bumpers. It adheres best to clean, dry, and grease-free surfaces for a secure, long-lasting bond.

Q: Is the carbon fiber protective film removable without damaging the paint?

A: Yes, the film is designed to be removable. For best results when removing, gently warm the strip with a hair dryer to soften the adhesive before slowly peeling it away. Avoid pulling too quickly to minimize any residue.

Q: Can I cut the strip to a custom length or shape?

A: Absolutely! The strip is easy to cut with standard scissors or a utility knife, making it fully customizable for any installation position on your vehicle. It is available in multiple widths (3cm, 5cm, 7cm, 10cm) for added flexibility.

Q: Is this protective film waterproof and suitable for outdoor use?

A: Yes, the 3D nano carbon fiber strip is 100% waterproof and designed to withstand outdoor conditions including rain, humidity, and regular car washes without lifting or peeling.