3D Printer Glue Stick & PTFE Lube Kit – Anti-Warp & Noise Fix

Keep your 3D printer running at peak performance with this all-in-one maintenance kit from SERLAVEXA. Whether you're battling warped prints or noisy guide rails, this combo of a washable bed adhesion glue stick and PTFE lubricating oil covers every essential maintenance need — perfect for beginners and seasoned makers alike.

Made in Mainland China.

🔹 1. Bed Adhesion Glue Stick – Stop Warping, Start Printing

• Super Adhesion: PVP water-soluble formula creates a stable adhesive layer on glass, metal, PEI, and carbon fiber hot beds — firmly holds PLA, ABS, PETG, TPU, PC, PA, and more.
• Anti-Warp Technology: Eliminates edge curling, displacement, and part detachment from the first layer up — boosting your print success rate dramatically.
• Easy Application: Twist-up stick design allows a quick, even thin coat — no mess, no fuss.
• Simple Clean-Up: Once cooled after printing, the adhesive washes off cleanly with water — zero residue, zero bed damage.
• Safe & Eco-Friendly: Low odour, non-toxic, acid-free, and certified to RoHS/REACH standards for a healthier printing environment.

🔹 2. PTFE Lubricating Oil – Silence the Machine

• Ultra-Low Friction: PTFE/PFPE formula delivers a friction coefficient as low as 0.05 — forming a long-lasting protective film on guide rails, screws, and bearings.
• Noise Reduction: Effectively reduces mechanical operating noise by 15–20 dB for a quieter, smoother printing experience.
• Extended Component Life: Wear is only 1/3 to 1/5 of ordinary grease — significantly extending the lifespan of core moving parts.
• Wide Temperature Range: Stable performance from -50°C to 280°C — no flow at high heat, no solidification in the cold.
• Dust-Resistant Formula: Strong chemical inertness resists dust and oil sludge build-up — one application provides long-lasting protection.

🔹 3. One-Stop Maintenance Kit – The Smart Choice

• Perfect Pairing: Glue stick handles hot bed adhesion; lubricant handles all moving parts — X/Y/Z axis rails, screws, gears, and extruders.
• Universal Compatibility: Works with virtually all FDM 3D printers including Creality, Anycubic, Prusa, and more.
• Beginner-Friendly: No complex setup — one kit covers the two most critical maintenance tasks right out of the box.
• Cost-Effective: Fewer failed prints, less mechanical wear, and less frequent maintenance means lower long-term costs.

📦 Specifications

🔗 You May Also Like

• 10-Pack 2.5mm HSS Twist Drill Bits – Micro Straight Shank Set
• 1/4" Hex Shank Wire Twister Drill Attachment | Rebar Tie Tool
• 1/16 Scale Miniature Clay Brick Set with Scraper – Red Wall Bricks

For safety guidelines on working with chemical lubricants and adhesives in your workspace, refer to OSHA's Chemical Hazards resource.

Frequently Asked Questions

Q: What 3D printer filaments are compatible with the bed adhesion glue stick?

A: The SERLAVEXA bed adhesion glue stick is compatible with virtually all mainstream FDM filaments including PLA, ABS, PETG, TPU, PC, and PA (Nylon). Its PVP water-soluble formula bonds reliably to glass, metal, PEI, and carbon fibre hot bed surfaces, making it one of the most versatile bed adhesion solutions available.

Q: How do I clean the bed adhesion glue from my print bed after use?

A: Cleaning is very simple. Once your print has finished and the bed has cooled down to room temperature, the glue residue can be wiped away with a damp cloth or rinsed off with clean water. It leaves no residue and will not damage your hot bed surface.

Q: How often should I apply the PTFE lubricating oil to my 3D printer?

A: Because the PTFE/PFPE formula is highly wear-resistant and dust-resistant, a single application provides long-lasting protection — typically every few months under regular use. You should re-apply if you notice increased noise or resistance in the guide rails, screws, or bearings. Always wipe away old grease before applying a fresh coat.

Q: Is this maintenance kit safe to use indoors?

A: Yes. The glue stick is low odour, non-toxic, and acid-free, certified to RoHS and REACH standards. The PTFE lubricating oil is chemically inert and non-reactive under normal printing conditions. However, we recommend using in a well-ventilated area, especially when your printer is running at elevated temperatures.