600ML Foam soap dispenser LED light infrared induction Hand washer automatic induction hand sanitizer machine soap dispenser Zpaxo Default Title

600ml Automatic Foam Soap Dispenser – LED Infrared Sensor

Q: What type of soap can I use in this automatic foam soap dispenser?

This dispenser works best with ready-to-use foam soap (no dilution needed). If you have gel soap, dilute it with 1 part liquid to 4 parts water. For latex-thickening type soap, use a 1:8 ratio of liquid to water. If you're unsure, check with your soap supplier for the correct dilution ratio before filling.

Q: How do I charge the BALASHOV automatic soap dispenser?

Use the included USB Type-C cable connected to a standard 5V/1A charger (not a fast charger). The battery light will flash during charging and all 4 battery indicator lights will remain solid when fully charged. Avoid using fast-charging adapters, as they may damage the internal electronics.

Q: How do I know when the battery is low?

When the battery is running low, the power indicator light will flash each time the sensor is triggered, and the color LED lights will not illuminate. Charge the unit promptly to restore full functionality.

Q: Can I mount this foam soap dispenser on a wall?

Yes! The package includes 2 mounting buckles so you can easily secure the dispenser to a wall in your bathroom, kitchen, or office for convenient, hands-free access.

Q: How do I clean the pump to prevent soap buildup?

Use the built-in auto-cleaning mode. While the unit is powered on, long-press the touch button for 3 seconds to enter cleaning mode. Then hold your hand near the sensor to dispense water through the pump. The cycle lasts 20 seconds and exits automatically, clearing any residual soap.

$62.35

$62.35 $77.25

Upgrade your handwashing routine with the BALASHOV F5 Symphony 600ml Automatic Foam Soap Dispenser — a sleek, touchless hand sanitizer machine featuring infrared motion sensing, vibrant LED color lighting, and four adjustable dispensing gears. Simply wave your hand and get the perfect amount of foam every time, no touching required. Made in Mainland China.

Why You'll Love It

Touchless Infrared Sensor – Automatically detects your hand within range and dispenses foam instantly, keeping germs off the pump
600ml Large Capacity – Fewer refills for busy households, offices, and bathrooms
4 Adjustable Dispensing Gears – Customize the amount of soap dispensed (1–4 gears) to suit your needs and reduce waste
Stunning LED Color Lighting – 8 magic color lights flash while dispensing, plus battery and gear indicator LEDs for full status visibility
USB Type-C Rechargeable – Powered by a built-in 18650 battery (3.7V); charges via the included USB-C cable — no disposable batteries needed
Auto-Clean Mode – Long-press 3 seconds to enter a 20-second self-cleaning cycle that purges leftover soap from the pump
Durable ABS + PP + Silicone Construction – Lightweight yet sturdy at just 260g net weight
Auto Standby – LEDs switch off automatically after 10 seconds of no use to conserve power
Wide Soap Compatibility – Works with foam soap directly; gel soap diluted 1:4 (liquid:water); latex thickening type diluted 1:8

Technical Specifications

Capacity	600 ml
Material	ABS, PP, Silicone
Battery	18650, 3.7V
Charging Port	USB Type-C (5V / 1A)
Operating Voltage	<20V
Product Size	119.4 × 80.6 × 234.3 mm
Net Weight	260 g
Operating Temperature	3°C – 55°C

What's in the Box

1× Automatic Foam Soap Dispenser
1× USB Type-C Charging Cable
1× User Manual
2× Mounting Buckles

How to Use

Power On: Hold the touch button for 3 seconds until battery, gear, and color lights activate.
Select Gear: Tap the touch button to cycle through gears 1–4 for less or more foam.
Dispense: Place your hand under the sensor — foam dispenses automatically.
Clean Mode: Long-press 3 seconds while on; hold hand near sensor to flush pump with water over 20 seconds.
Power Off: Hold touch button until all lights turn off.

Care & Safety Notes

Do NOT rinse or submerge the unit in water; wipe exterior with a damp cloth only.
Do NOT use fast-charging adapters; use only a 5V/1A CCC-certified charger.
Keep unit upright at all times to prevent liquid leakage from the air inlet.
Store in a cool, dry place away from direct sunlight and heat sources.
Charge every 2 months if stored long-term to extend battery life.

Related Products You May Like

For more information on effective hand hygiene and handwashing best practices, visit the CDC Handwashing Guidelines.

Frequently Asked Questions

Q: What type of soap can I use in this automatic foam soap dispenser?

A: This dispenser works best with ready-to-use foam soap (no dilution needed). If you have gel soap, dilute it with 1 part liquid to 4 parts water. For latex-thickening type soap, use a 1:8 ratio of liquid to water. If you're unsure, check with your soap supplier for the correct dilution ratio before filling.

Q: How do I charge the BALASHOV automatic soap dispenser?

A: Use the included USB Type-C cable connected to a standard 5V/1A charger (not a fast charger). The battery light will flash during charging and all 4 battery indicator lights will remain solid when fully charged. Avoid using fast-charging adapters, as they may damage the internal electronics.

Q: How do I know when the battery is low?

A: When the battery is running low, the power indicator light will flash each time the sensor is triggered, and the color LED lights will not illuminate. Charge the unit promptly to restore full functionality.

Q: Can I mount this foam soap dispenser on a wall?

A: Yes! The package includes 2 mounting buckles so you can easily secure the dispenser to a wall in your bathroom, kitchen, or office for convenient, hands-free access.

Q: How do I clean the pump to prevent soap buildup?

A: Use the built-in auto-cleaning mode. While the unit is powered on, long-press the touch button for 3 seconds to enter cleaning mode. Then hold your hand near the sensor to dispense water through the pump. The cycle lasts 20 seconds and exits automatically, clearing any residual soap.